Mike'n Mink is a baby bottle container that can keep babyís feed
warm up to 6 hours.
The unique ìbaby bottle insulatorî is made from DOWN,
a natural material which has a unique characteristic of highest warmth
to weight ratio when compared to synthetic fills and other natural fills.
To illustrate this unique capacity to retain heat, a baby bottle filled
with 8 ounces of hot water at 83 C (181.4 fahrenheit) was placed in a normal
room temperature at 28 C (82.4 fahrenheit).
After 1 hour and 15 minutes, the temperature of the water inside the baby
bottle was measured at 41.5-42 C (106.7-107.6 fahrenheit), and after
2 hours had passed, at 35 C (95 fahrenheit).
HOWEVER, WHEN THE SAME BOTTLE WAS PUT INSIDE Mike'n Mink CONTAINER
AND PLACED IN A NORMAL ROOM TEMPERATURE AT 28 C (82.4 fahrenheit), THE
WATER TEMPERATURE WAS MEASURED AT 41.5-42 C (106.7-107.6 fahrenheit) AFTER
6 HOURS HAD PASSED.
To illustrate further, when the same
container was placed in the freezer of the refrigerator at temperature
of -8 C (8 degree below zero), the water temperature was measured
at 41.5-42 C after 2 hours and 30 minutes.
From the manufacturerís extensive experiments, DOWN has
the best heat retaining capacity when compared to other man-made
materials.
USERíS GUIDE
Mikeín Mink ìbaby bottle insulatorî is specially
designed so that the insulator-layer can easily be removed from the outer
container case. The insulator-layer is made with special fabric with
water-repellent property and can be cleaned by using a piece of cloth with
water and mild soap, clean out all the soap and properly dry the insluator-layer
with dry cloth.
TO ASSURE MAXIMUM HEAT RETAINING CAPACITY, INSULATOR-LAYER SHOULD BE EXPOSED
TO DIRECT SUNLIGHT FOR 15-20 MINUTES FROM TIME TO TIME or PUT
THE INSULATOR-LAYER INSIDE THE DRYER FOR 5-10 MINUTES, AND ALWAYS MAKE
SURE THAT THE LID IS PROPERLY CLOSED WHEN IN USED.